表面形貌控制增强铁基载氧体与褐煤化学链燃烧反应活性

为探究载氧体形貌控制获取适用于化学链燃烧的高活性表面结构载氧体的可行性,以Fe2O3作为模型载氧体,从理论上对比研究Fe2O3的高弥勒指数晶面(104)和Fe2O3自然裸露的最主要晶面之一(001)的表面电子特性,结果表明,Fe2O3(104)的电子结构更有利于表面与煤模型分子的相互作用.基于理论分析结果,从实验上控制制备了单晶载氧体Fe2O3(104)/Al2O3,研究了该载氧体与褐煤的化学链燃烧反应特性.Fe2O3(104)/Al2O3比传统浸渍法制备的载氧体Fe2O3/Al2O3具有更高的反应活性,与理论计算结果一致.元素分析表明,Fe2O3(104)/Al2O3与褐煤反应的积碳量远少于Fe2O3/Al2O3与褐煤反应的积碳量.对比新鲜载氧体及再生后载氧体的结构发现,Fe2O3(104)/Al2O3在反应过程中不断进行氧化还原反应而发生结构弛豫后,仍然能通过氧化再生.这表明形貌控制制备可为化学链燃烧技术开发新型高效载氧体提供新思路.     

石墨烯衍生物负载的纳米催化剂用于氧还原反应

综述了用于燃料电池中氧还原反应(ORR)的石墨烯衍生物负载的各种纳米催化剂的最新进展。介绍了用于表征石墨烯基电催化剂的常规电化学技术以及石墨烯基电催化剂最新的研究进展。负载于还原氧化石墨烯(RGO)上的Pt催化剂的电化学活性和稳定性均得到显著提高。其它贵金属催化剂,如Pd, Au和Ag也表现出较高的催化活性。当以RGO或少层石墨烯为载体时, Pd催化剂的稳定性提高。讨论了氧化石墨烯负载Au或Ag催化剂的合成方法。另外,以N4螯合络合物形式存在的非贵过渡金属可降低氧的电化学性能。 Fe和Co是可替代的廉价ORR催化剂。在大多数情况下,这些催化剂稳定性和耐受性的问题均可得到解决,但其整体性能还很难超越Pt/C催化剂。     

具有高光催化活性的黑色TiO2（B）/锐钛矿双晶TiO2-x纳米纤维

高效TiO2基光催化材料的开发一直是催化领域的研究热点,主要的策略是如何有效地分离光生载流子.制备多晶相的TiO2材料可引入异质/相结结构使电子与空穴朝不同方向移动,从而避免电子与空穴复合;另外,在TiO2中掺杂其他金属或非金属也可以有效地降低电子与空穴的复合率,掺杂的元素作为电子捕获阱俘获光生电子,以实现电子空穴的有效分离.近些年,作为一种全新的掺杂剂,氧空穴可以有效改善TiO2的光催化活性,所制TiO2具有可见光的全光谱吸收能力,因此该类TiO2呈现出黑色.通过上述方法均可以制备出高活性TiO2基光催化材料,如果能够将这些方法耦合一起,则可能制备出活性更高的光催化剂.因此,本文将异相结结构和空穴掺杂耦合起来,用多孔钛酸盐衍生物在H2中高温焙烧制得一种全新的黑色TiO2(B)/锐钛矿双晶TiO2–x纳米纤维.不同于其他TiO2基光催化材料,该样品仅由Ti和O元素组成,通过Ti和O元素的组合,形成了双晶结构和空穴掺杂两种特殊的结构,借助场发射(FESEM)、拉曼光谱(Raman)、氮气物理吸脱附、X射线光电子能谱(XPS)、热重(TG)、紫外可见漫反射光谱(UV-Vis)和荧光光谱(PL)等表征分析了样品的结构及其光催化性能间构效关系. FESEM结果显示,黑色TiO2(B)/锐钛矿双晶TiO2–x为长1–5mm、宽0.2mm的纤维结构, Raman结果表明,锐钛矿相在特征波段(140 cm–1左右)和TiO2(B)的特征波段(220–260 cm–1)均发生蓝移,说明该两相中均存在氧空穴;该样表面未检测到Ti3+,因此氧空穴可能分散在TiO2(B)和锐钛矿相的体相中.根据黑色TiO2(B)/锐钛矿双晶TiO2–x和白色TiO2(B)/锐钛矿双晶TiO2的失重差,估算出前者的O/Ti原子比为1.97.光催化降解甲基橙实验结果显示,黑色TiO2(B)/锐钛矿双晶TiO2–x的光催化活性是白色双晶TiO2的4.2倍,锐钛矿TiO2的10.5倍,且连续反应10次后未出现失活现象,显示出了良好的光催化稳定性.前期,我们已经证明了白色TiO2(B)/锐钛矿双晶TiO2由于具有TiO2(B)和锐钛矿的异相结结构,致使其电子空穴有效地分离,从而表现出优异的光催化活性;本文的PL结果显示,由于氧空穴的引入,异相结与氧空穴两者共同作用,进一步促进了黑色TiO2(B)/锐钛矿双晶TiO2–x电子与空穴的有效分离,因此黑色TiO2(B)/锐钛矿双晶TiO2–x表现出高的光催化活性.由于其特殊的结构,黑色TiO2(B)/锐钛矿双晶TiO2–x纳米纤维将在环境与能源领域表现出良好的应用前景.     

Z型复合催化剂g-C3N4/Vo-ZnO光催化活性的研究

随着科学技术的不断进步和经济的快速发展,人类对自然资源的需求量越来越大,在开发利用自然资源的同时,大量的有机污染物也随之进入自然环境.这些物质不仅污染环境、破坏生态,更对人类的生活和健康带来了巨大的威胁.研究证实,半导体光催化剂在光照条件下可以破坏有机污染物的分子结构,最终将其氧化降解成CO2、H2O或其它不会对环境产生二次污染的小分子,从而净化水质.近年来,有关光催化降解有机污染物的报道日益增多. ZnO作为一种广泛研究的光催化降解材料,因其无毒、低成本和高效等特点而具有一定的应用前景.但是ZnO较大的禁带宽度(3.24 eV)导致其只能吸收紫外光部分,而对可见光的吸收效率很小,极大地制约了其实际应用.除此之外, ZnO受光激发产生的电子-空穴分离效率较低、光催化过程中的光腐蚀严重也是制约其实际应用的重要因素.为了提高ZnO的光催化活性和稳定性,本文合成了用g-C3N4修饰的氧空位型ZnO(g-C3N4/Vo-ZnO)复合催化剂,在有效调控ZnO半导体能带结构的同时,通过负载一定量的g-C3N4以降低光生电子-空穴对的复合速率和反应过程中ZnO的光腐蚀,增强催化剂的光催化活性和稳定性.本文首先合成前驱体Zn(OH)F,然后焙烧三聚氰胺和Zn(OH)F的混合物得到g-C3N4/Vo-ZnO复合催化剂,并采用电子顺磁共振波谱(EPR)、紫外-可见光谱(UV-vis)、高分辨透射电镜(HRTEM)和傅里叶变换红外光谱(FT-IR)等表征了它们的结构及其性质. EPR结果表明,ZnO焙烧后具有一定浓度的氧空位,导致其禁带宽度由3.24 eV降至3.09 eV,因而提高了ZnO对可见光的吸收效率. UV-vis结果显示, Vo-ZnO复合g-C3N4后对可见光的吸收显著增强. HRTEM和FT-IR结果均表明, g-C3N4纳米片和Vo-ZnO颗粒之间通过共价键形成了强耦合,这对g-C3N4/Vo-ZnO复合催化剂中光生载流子的传送和光生电子-空穴对的有效分离起到重要作用.可见光催化降解甲基橙(MO)和腐殖酸(HA)的实验进一步证明, g-C3N4/Vo-ZnO复合材料具有较好的光催化活性,优于单一的g-C3N4或Vo-ZnO材料.同时还发现, g-C3N4的负载量对光催化活性有显著影响,当氮化碳的负载量为1 wt%时,所制材料具有最高的光催化活性：可见光照射60 min后,MO降解率可达到93%, HA降解率为80%.复合材料光催化活性的增强一方面是因为氧空位的形成减小了ZnO的禁带宽度,使得ZnO对可见光的吸收能力大大增强;另一方面, g-C3N4和Vo-ZnO的能带符合了Z型催化机理所需的有效能带匹配,使得光生电子-空穴对得到了有效的分离,从而提高了光催化活性.降解MO的循环实验表明, g-C3N4/Vo-ZnO催化剂具有很好的稳定性且不容易发生光腐蚀.与此同时,我们对比了用不同方法制备的g-C3N4/ZnO材料的催化性能.结果显示,本文制备的g-C3N4/Vo-ZnO复合材料具有更好的降解效率.总体而言,对于降解有机污染物, g-C3N4/Vo-ZnO可能是一个更为有效可行的催化体系.此外,本文也为设计与制备其他新型光催化剂提供了一条新的思路.     

热解二氧化钛/聚苯胺制备高效非贵金属氧还原电催化剂

为了克服传统Pt系催化剂价格昂贵、稳定性差的缺点,采用热解新型Ti O2/聚苯胺(PANI)复合物的方法合成了Ti O2/C催化剂.用扫描电子显微镜、X射线光电子能谱、X射线衍射、傅里叶变换红外光谱、拉曼光谱、透射电子显微镜、循环伏安法和线性扫描伏安法等方法研究了热处理和PANI复合比例对复合物的形貌、成键、晶相组成及氧还原性能的影响.结果表明,PANI与Ti O2间存在相互作用,可以抑制Ti O2的团聚和锐钛矿向金红石的转变.热处理制得Ti O2/C的氧还原活性随着PANI载体含量增加先升高后降低,PANI和Ti O2质量比为35/100时,催化剂的氧还原活性最高.同时,循环伏安和时间-电流曲线测试表明,已制备的复合材料在催化氧还原反应进行时具有较好的稳定性.     

Core–Shell LiFePO4/Carbon‐Coated Reduced Graphene Oxide Hybrids for High‐Power Lithium‐Ion Battery Cathodes

Core‐shell carbon‐coated LiFePO₄ nanoparticles were hybridized with reduced graphene (rGO) for high‐power lithium‐ion battery cathodes. Spontaneous aggregation of hydrophobic graphene in aqueous solutions during the formation of composite materials was precluded by employing hydrophilic graphene oxide (GO) as starting templates. The fabrication of true nanoscale carbon‐coated LiFePO₄‐rGO (LFP/C‐rGO) hybrids were ascribed to three factors: 1) In‐situ polymerization of polypyrrole for constrained nanoparticle synthesis of LiFePO₄, 2) enhanced dispersion of conducting 2D networks endowed by colloidal stability of GO, and 3) intimate contact between active materials and rGO. The importance of conducting template dispersion was demonstrated by contrasting LFP/C‐rGO hybrids with LFP/C‐rGO composites in which agglomerated rGO solution was used as the starting templates. The fabricated hybrid cathodes showed superior rate capability and cyclability with rates from 0.1 to 60 C. This study demonstrated the synergistic combination of nanosizing with efficient conducting templates to afford facile Li⁺ ion and electron transport for high power applications.     

Structure Modification Function of g‐C3N4 for Al2O3 in the In Situ Hydrothermal Process for Enhanced Photocatalytic Activity

Heterojunctions of g‐C₃N₄/Al₂O₃ (g‐C₃N₄=graphitic carbon nitride) are constructed by an in situ one‐pot hydrothermal route based on the development of photoactive γ‐Al₂O₃ semiconductor with a mesoporous structure and a high surface area (188 m²g^?1) acting as electron acceptor. A structure modification function of g‐C₃N₄ for Al₂O₃ in the hydrothermal process is found, which can be attributed to the coordination between unoccupied orbitals of the Al ions and lone‐pair electrons of the N atoms. The as‐synthesized heterojunctions exhibit much higher photocatalytic activity than pure g‐C₃N₄. The hydrogen generation rate and the reaction rate constant for the degradation of methyl orange over 50 % g‐C₃N₄/Al₂O₃ under visible‐light irradiation (λ>420 nm) are 2.5 and 7.3 times, respectively, higher than those over pristine g‐C₃N₄. The enhanced activity of the heterojunctions is attributed to their large specific surface areas, their close contact, and the high interfacial areas between the components as well as their excellent adsorption performance, and efficient charge transfer ability.     

丙二硫醚桥联双β-二酮与Ni(Ⅱ)配位作用及液膜传输性研究

合成了丙二硫醚桥联2个乙酰丙酮的双β-二酮分子1,3-二(3-硫醚基-2,4-戊二酮基)丙烷(L1),以此为配体与镍(Ⅱ)作用得到配合物,通过元素分析和摩尔电导分析方法确定了镍(Ⅱ)配合物的化学组成,比较分析了配位前后的游离配体与配合物的红外及紫外吸收光谱,采用紫外光谱滴定法对配体L1与Ni(Ⅱ)离子在溶液中的配位行为进行了模拟研究,并进行金属离子液膜传输实验考察了L1对Ni(Ⅱ)的液膜传输性能。结果显示,L1通过4个O原子与Ni(Ⅱ)配位成键形成配合物,且对Ni(Ⅱ)具有良好的液膜传输性。     

Regioselective Ring‐Opening Polymerization of a Polyhydroxycarboxylic Acid for the Synthesis of a Nanoscale Carrier Material with pH‐Dependent Stability and Sustained Drug Release

Synthetic polyesters are usually composed of monohydroxycarboxylic acids to avoid the problem of regioselectivity during ring‐opening polymerization. In contrast, the linear polyester BICpoly contains four secondary OH groups and is nevertheless esterified regioselectively at only one of these positions. Neither the synthesis of the tricyclic monomers nor the ring‐opening polymerization requires protecting groups, making BICpoly an attractive novel and biocompatible polymer. BICpoly nanoparticles can be loaded with low‐molecular weight drugs or coated onto surfaces as thin films. The release of loaded compounds makes BICpoly an attractive depot for drug release, as shown herein by loading BICpoly with dyes or the cytostatic drug doxorubicin. BICpoly is distinguishable from other polymers by its characteristic pH‐dependent degradation.     

A Mixed Ionic and Electronic Conducting Dual‐Phase Membrane with High Oxygen Permeability

To combine good chemical stability and high oxygen permeability, a mixed ionic‐electronic conducting (MIEC) 75 wt % Ce_0.85Gd_0.1Cu_0.05O_2?δ‐25 wt % La_0.6Ca_0.4FeO_3?δ (CGCO‐LCF) dual‐phase membrane based on a MIEC–MIEC composite has been developed. Copper doping into Ce_0.9Gd_0.1O_2?δ (CGO) oxide enhances both ionic and electronic conductivity, which then leads to a change from ionic conduction to mixed conduction at elevated temperatures. For the first time we demonstrate that an intergranular film with 2–10 nm thickness containing Ce, Ca, Gd, La, and Fe has been formed between the CGCO grains in the CGCO‐LCF one‐pot dual‐phase membrane. A high oxygen permeation flux of 0.70 mL min^?1 cm^?2 is obtained by the CGCO‐LCF one‐pot dual‐phase membrane with 0.5 mm thickness at 950 °C using pure CO₂ as the sweep gas, and the membrane shows excellent stability in the presence of CO₂ even at lower temperatures (800 °C) during long‐term operation.